Fume Hood Fabrication for the Steel Producing Industry

(Click on thumbnail to enlarge)

Click to enlarge
Fume Hood Fabrication for the Steel Producing Industry 1
Click to enlarge
Fume Hood Fabrication for the Steel Producing Industry 2
Click to enlarge
Fume Hood Fabrication for the Steel Producing Industry 3

Refax, Inc. was contracted by a steel producer in Northwest Indiana to fabricate a fume hood. The primary function of a fume hood is to capture gases that are produced when alloys are injected in molten steel for specific types of product. Refax worked from customer supplied 2D CAD prints. The fabrication was built completely out of A516 Grade 70 steel. The entire project was completed with our company's abilities involving burning, bending/forming, fitting, arc welding per AWS standards, and our quality control process. The hood had to be fabricated in two separate pieces, an upper section and a lower section.

The dual part fabrication was due to transportation and installation limitations. This required us to match mark parts to ensure minimal fit up issues for onsite installation. There were no such issues.

Request Quote

Fabricated Fume Hood Specifications

Product Description The primary function of a Fume Hood is to capture gases associated with alloy insertion in the steel making process.
Capabilities Applied/Processes
Burning
Bending
Fitting
ARC Welding
Tightest Tolerances +/- 1/8"
Material Used A36
In process testing performed 100% Inspection
Industry for Use Steel making/producing
Volume 1
Delivery Location Gary, Indiana
Standards Met Customer supplied print, 2D CAD Drawing
Product Name Fume Hood

Back to top

Refax, Inc.